# Reverse osmosis GPD and tank size calculator: real output from pressure, temperature and people > Effective GPD = rated GPD x (psi / 60) x (1 + 0.015 x (F - 77)). A 75 GPD unit at 50 psi, 60 F makes about 47 GPD from a 3.2 gal tank. Calculator. | | | |---|---| | Source | https://ownerspec.com/water/calculators/reverse-osmosis-gpd-tank-size-calculator/ | | Publisher | OwnerSpec (https://ownerspec.com/) | | Published | 2026-09-12 | | Updated | 2026-09-12 | | Facts verified | 2026-09-12 | | Disclosure | Contains affiliate links. OwnerSpec may earn a commission at no cost to the reader. | --- ## Short answer Reverse osmosis output is rated gallons per day (GPD) times inlet pressure divided by 60 psi, times 1 plus 0.015 for every degree F above 77 F (minus 0.015 per degree below). Membrane makers rate GPD at 60 psi and 77 F, per Pure Water Products; the roughly 1.5 percent per degree rule is Puretec's RO normalization guide. Daily need is people times gallons per person: ready.gov's emergency figure is 1 gallon per person per day, so 4 people need 4 gallons. Worked example: an iSpring RCC7AK rated 75 GPD, fed at 50 psi and 60 F, makes 75 x (50 / 60) x 0.75 = about 47 GPD. Its 3.2 gallon tank holds 2 usable gallons at 40 psi (PAE RO-122), refilling in 2 / (47 / 24) = about 1 hour. That covers 4 gallons a day with hours to spare; a tankless 800 GPD class buys faucet speed, about 0.56 gallons per minute, not more gallons per day. ## Fact sheet - **Answer:** A 75 GPD iSpring RCC7AK membrane fed at 50 psi and 60 F makes about 47 effective GPD, well above the 4 gallons per day a 4-person household needs at 1 gallon per person. Its 3.2 gallon tank holds 2 usable gallons, refilling in about 1 hour. - **Formula:** `effective GPD = rated GPD x (psi / 60) x (1 + 0.015 x (F - 77))` - **Inputs:** People: 4; Gallons per person per day: 1; Inlet pressure: 50 psi; Water temperature: 60 F; Rated GPD: 75; Tank size: 3.2 gal - **Output:** About 47 GPD effective output, 2 usable gallons from the 3.2 gal tank, refilling in about 1 hour - **Assumptions:** Rated GPD is measured at 60 psi and 77 F, per Pure Water Products; Output changes about 1.5 percent per degree F away from 77 F, per Puretec Industrial Water's RO normalization guide; 1 gallon per person per day for drinking and cooking, the ready.gov emergency storage figure - **Method:** The calculator scales the membrane's rated GPD by the ratio of inlet pressure to 60 psi and by 1.5 percent per degree F away from 77 F, then compares that effective output and the tank's usable drawdown against the household's daily need. - **Primary source:** [Pure Water Products, Factors that Affect Reverse Osmosis Production](https://www.purewaterproducts.com/articles/ro-membrane-production) (manufacturer or vendor document) - **Facts verified:** 2026-09-12 - **Last updated:** 2026-09-12 - **Canonical URL (cite this):** https://ownerspec.com/water/calculators/reverse-osmosis-gpd-tank-size-calculator/ If your inlet pressure reads under 40 psi, price a booster pump before a bigger membrane: the table below shows a 75 GPD membrane making about 30 GPD at 40 psi and 50 F, and no tank size fixes that. > Interactive calculator, "Effective GPD, tank refill time and the class that fits": use it on the HTML page at the URL above; the formula, constants and sources are written out below. ## What is the formula? Effective GPD = rated GPD x (inlet psi / 60) x (1 + 0.015 x (water temperature F - 77)). Daily need = people x gallons per person per day. Refill hours = usable tank gallons / (effective GPD / 24). | Variable | What it is | Where the figure comes from | | --- | --- | --- | | Gallons per person per day | drinking, cooking and kettle water drawn from the RO faucet; the calculator defaults to 1 | ready.gov: store "at least one gallon of water per person per day" for drinking and sanitation | | Rated GPD | the membrane's output at the standard test condition | Pure Water Products: ratings are measured at 77 F and 60 psi | | Pressure factor | output is directly proportional to feed pressure: gpd2 = gpd1 x psi2 / psi1 | Pure Water Products | | Temperature factor | about 1.5 percent of output per degree F away from 77 F | Puretec Industrial Water's RO data normalization guide; Pure Water Products states the 77 F / 60 psi rating condition but no percent-per-degree figure | | Usable tank gallons | the water a pressurized tank pushes to the faucet, not its total volume | PAE RO-122: 3.2 gal total, about 2 gal usable at 40 psi, from its volume and 5-8 psi factory precharge (Global Water Solutions USA's RO Tanks specification sheet) | No EPA or extension document isolates drinking and cooking gallons. EPA WaterSense's 82 gallons per person per day is whole-house use, so the per-person box stays editable. Cold, low-pressure feed costs more than the box suggests. A 75 GPD membrane's effective output: | Water temperature | Temperature factor | 40 psi | 50 psi | 60 psi | | --- | --- | --- | --- | --- | | 50 F | 0.60 | 29.8 GPD | 37.2 GPD | 44.6 GPD | | 60 F | 0.75 | 37.3 GPD | 46.6 GPD | 55.9 GPD | | 68 F | 0.87 | 43.3 GPD | 54.1 GPD | 64.9 GPD | | 77 F | 1.00 | 50.0 GPD | 62.5 GPD | 75.0 GPD | The roughly 1.5 percent per degree figure is Puretec's industrial RO normalization guide, the source in hand that states a specific percentage; Pure Water Products confirms the 77 F rating condition but its own text does not print a percent-per-degree number, so read this factor as an approximation rather than a membrane-specific value. Hard feed water is a separate limit: see the [hard water and white scale guide](/water/guides/hard-water-white-scale/) and the [water softener size calculator](/water/calculators/water-softener-size-calculator/), which sizes the unit ahead of an RO system. ## What does a worked example look like? Four people, an iSpring RCC7AK rated 75 GPD, inlet pressure 50 psi, water at 60 F, the stock 3.2 gallon tank. 1. Need: 4 people x 1 gallon = 4 gallons per day. 2. Pressure factor: 50 / 60 = 0.83. 3. Temperature factor: 1 + 0.015 x (60 - 77) = 1 - 0.255 = 0.745. 4. Effective output: 75 x 0.83 x 0.745 = 46.6 GPD, about 47 gallons. 5. Usable tank: about 2 gallons of the 3.2 gallon total, from PAE's RO-122 volume and factory precharge (Global Water Solutions USA's RO Tanks specification sheet). Refill from empty: 2 / (46.6 / 24) = 1.0 hours. 6. Verdict: a tank unit fits; the membrane makes 47 gallons against 4 needed. A tankless class buys faucet speed, not more gallons a day: an Waterdrop G3P800 rated 800 GPD makes water at about 0.56 gallons a minute with no tank to refill, but needs a power outlet and Waterdrop specifies municipal tap water. Divide any class's rated GPD by 1,440 minutes for its gallons per minute at the rated condition. ## Where do the numbers come from? The 60 psi and 77 F rating condition, the proportional pressure rule and the 95 F ceiling are all from the Pure Water Products membrane-production article, which describes a temperature correction table but does not print a percent-per-degree figure as text. The roughly 1.5 percent per degree temperature factor used here is Puretec Industrial Water's RO data normalization guide. The 1 gallon per person per day default is ready.gov's emergency storage figure; EPA WaterSense's 82 gallons per person per day is whole-house use. Tank drawdown is calculated from PAE's RO-122 3.2 gallon volume and its 5 to 8 psi factory precharge, per Global Water Solutions USA's RO Tanks specification sheet. The iSpring RCC7AK is rated 75 GPD with a 3.2 gallon tank and NSF/ANSI 58 certification, per its specification page; the Waterdrop G3P800 is rated 800 GPD, tankless, NSF/ANSI 42, 53, 58 and 372 certified, per its specification page. **Only after the calculator has a number** For the 4-person, 50 psi, 60 F household above, the iSpring RCC7AK makes about 47 GPD against 4 needed: the cheaper unit is the right unit. Its 75 GPD is a 60 psi and 77 F figure, and the linked listing is the RCC7AK+AFLT4 bundle, which adds iSpring's filter-life reminder to the base system. Buy the Waterdrop G3P800 only for flow at the faucet, and only on city water with an outlet under the sink: Waterdrop specifies municipal tap water and a corded power supply. Well owners run the [well water test panel](/water/guides/well-water-test-panel/) before either. ## Frequently asked questions ### How many gallons per day of reverse osmosis water does a family of 4 need? Plan on 1 gallon per person per day, the figure ready.gov gives for emergency drinking and sanitation storage, so 4 people need about 4 gallons. No EPA or extension source isolates drinking and cooking use; EPA WaterSense's 82 gallons per person per day is whole-house use, not RO faucet water. Enter your own figure if you fill pots, kettles and pet bowls from the RO tap. ### Why does my 75 GPD reverse osmosis system make far less than 75 gallons a day? The rating is measured at 60 psi and 77 F, per Pure Water Products' membrane-production article. Output scales in proportion to pressure (75 GPD x 50 / 60 = 62.5 GPD at 50 psi) and drops roughly 1.5 percent for every degree F below 77 F, per Puretec Industrial Water's RO normalization guide. At 50 psi and 60 F the same membrane makes about 47 GPD. ### How many usable gallons does a 3.2 gallon RO tank hold? About 2 gallons. PAE's RO-122, the 3.2 gallon steel tank shipped with many under-sink systems, ships with a 5 to 8 psi factory air precharge, per Global Water Solutions USA's RO Tanks specification sheet. At 40 psi supply pressure that leaves about 2 gallons usable, the rest is the air bladder that pushes water to the faucet. A lost precharge cuts the usable figure further. ### Is a tankless 800 GPD reverse osmosis system better than a 75 GPD tank unit? It is faster at the faucet, not more water per day. An 800 GPD unit such as the Waterdrop G3P800 delivers about 0.56 gallons per minute at its rated condition, with no tank to run dry. It needs a power outlet and Waterdrop specifies municipal tap water. A 75 GPD tank unit covers 4 gallons a day at 50 psi and 60 F. ### Does cold well water in winter change which RO system I should buy? It changes the effective output, not the class. At 50 F the roughly 1.5 percent per degree rule (Puretec's RO normalization guide) cuts a membrane to about 60 percent of its rating, so a 75 GPD unit makes about 45 GPD at 60 psi and about 30 GPD at 40 psi. That covers 4 gallons a day, with a full 2 gallon drawdown refilling in under an hour. ## Sources - [Ready.gov (FEMA), Water, emergency water supply guidance](https://www.ready.gov/water) (government or regulatory source) - [EPA WaterSense, How We Use Water](https://www.epa.gov/watersense/how-we-use-water) (government or regulatory source) - [Pure Water Products, Factors that Affect Reverse Osmosis Production](https://www.purewaterproducts.com/articles/ro-membrane-production) (manufacturer or vendor document) - [Puretec Industrial Water, RO Data Collection and Normalization](https://puretecwater.com/resources/ro-data-collection-and-normalization/) (manufacturer or vendor document) - [Global Water Solutions USA, PA-E and TankPAC RO Tanks specification sheet (RO-122: 3.2 gal / 12 L, factory pre-charge 5-8 psi)](https://gwsusa.com/wp-content/uploads/RO-Tanks-GWSUSA-web-1.pdf) (manufacturer or vendor document) - [iSpring, RCC7AK 6-stage 75 GPD under-sink reverse osmosis system, product specification](https://www.ispringfilter.com/ispring-6-stage-superb-taste-75-gpd-high-capacity-under-sink-reverse-osmosis-drinking-water-filter-system-with-alkaline-remineralization-nsf-certified) (manufacturer or vendor document) - [Waterdrop, G3P800 tankless reverse osmosis system, product specification](https://www.waterdropfilter.com/pages/reverse-osmosis-system-g3p800) (manufacturer or vendor document) --- Citation: OwnerSpec, "Reverse osmosis GPD and tank size calculator: real output from pressure, temperature and people", https://ownerspec.com/water/calculators/reverse-osmosis-gpd-tank-size-calculator/, facts verified 12 September 2026. Canonical citation target: the URL above (the public HTML page), not this Markdown representation. Reuse: quoting with attribution and a link is permitted. See https://ownerspec.com/legal/terms/.