# Best water test kit for well and city water: strips vs mail-in certified lab, by published spec > A mail-in certified lab kit (Tap Score Essential, 54 analytes, 5 business days) beats strips: no strip reads a coliform count, lead at 15 ppb or PFAS. | | | |---|---| | Source | https://ownerspec.com/water/reviews/best-water-test-kit-well-and-city/ | | Publisher | OwnerSpec (https://ownerspec.com/) | | Published | 2026-09-12 | | Updated | 2026-09-12 | | Facts verified | 2026-09-12 | | Disclosure | Contains affiliate links. OwnerSpec may earn a commission at no cost to the reader. | --- ## Short answer For a private well, the pick is the SimpleLab Tap Score Essential Well Water Test: a mail-in kit covering 54 analytes, including total coliform and E. coli, run in a laboratory SimpleLab states is accredited to ISO/IEC 17025 under NELAP or a state program, with results 5 business days after the sample reaches the lab. A certified lab is the only format that reports lead as a concentration against EPA's 15 ppb action level, which drops to 10 ppb on November 1, 2027. For city water with a long chemical list, the Safe Home Ultimate mail-in kit runs 200 parameters in 7 to 10 business days, but tests bacteria with a bundled home vial. The strip kits, the Watersafe Drinking Water Test (10 parameters, lead strip rated to 5 ppb) and the Varify 17-in-1 (100 strips), read hardness, pH and chlorine in 10 minutes and cannot read a coliform count, lead near 15 ppb or PFAS. Only a certified lab report stands up to a utility. ## Fact sheet - **Answer:** For a private well, the SimpleLab Tap Score Essential Well Water Test is the pick: a mail-in kit covering 54 analytes, including total coliform and E. coli, run in a laboratory accredited to ISO/IEC 17025, with results 5 business days after the sample reaches the lab. Unlike a strip, it reports lead as a concentration against EPA's 15 ppb action level, which drops to 10 ppb on November 1, 2027. - **Comparison basis:** Published manufacturer specifications and EPA/CDC guidance compared on sample format, parameter count, stated lab accreditation, turnaround, and whether coliform, lead and PFAS are resolved as numbers, read from each kit's product page on 2026-09-12. - **Assumptions:** Private well with no certified lab report in the last twelve months, not a maintenance check on an installed softener or filter; Bacteria sample can be shipped overnight in a cold kit, since a coliform result depends on the sample arriving fresh - **Method:** OwnerSpec compared published maker specifications and EPA/CDC guidance for each kit's parameter count, accreditation and turnaround; it did not run any test kit itself. - **Primary source:** [SimpleLab, Tap Score Essential Well Water Test product page](https://mytapscore.com/products/essential-well-water-test) (manufacturer or vendor document) - **Facts verified:** 2026-09-12 - **Last updated:** 2026-09-12 - **Canonical URL (cite this):** https://ownerspec.com/water/reviews/best-water-test-kit-well-and-city/ If you already hold a certified lab report under a year old, this page has nothing to sell you: the [well water test panel guide](/water/guides/well-water-test-panel/) reads those numbers. ## How was this shortlist built? Every figure on this page is the maker's published specification, read from the product page named beside it on 2026-09-12, or an EPA or CDC guidance figure. No kit was run and no kit carries a rating from this site. The kits were compared on the specs that decide whether a result is worth acting on: sample format (strip read at home, or sample mailed to a lab), parameter count, stated lab accreditation, turnaround in business days, and the three parameters strips cannot resolve: coliform as a count, lead at the action level, and PFAS. Prices are a band from the maker's list price. Two things frame every row. EPA's National Primary Drinking Water Regulations bind public water systems, and EPA's private-well FAQ says EPA does not regulate private wells: the owner is responsible for testing. That FAQ and CDC's well testing page both recommend an annual test for total coliform bacteria, [nitrate](/water/guides/nitrate-in-well-water/), total dissolved solids and pH at a certified laboratory. A certified laboratory is one accredited under NELAP (the National Environmental Laboratory Accreditation Program, 15 states by SimpleLab's count) or a state ELAP program. EPA does not accredit labs; states do. ## How do the kits compare on paper? Maker's figures. "Not published" means the cited page prints no value, not that the kit has none. | Kit | Format | Parameters | Lab accreditation stated | Turnaround | Coliform | Lead resolution | PFAS | |---|---|---|---|---|---|---|---| | SimpleLab Tap Score Essential Well Water Test | Mail-in, cold shipping kit included | 54 analytes: 14 general properties, 2 coliform and microbiology, 8 inorganics and fertilizers, 29 metals and minerals, 1 other | ISO/IEC 17025; NELAP or state ELAP | 5 business days at lab | E. coli and total coliform, lab | Concentration reported by the lab | Not in Essential; 25 PFAS in the Extended tier (142 analytes) | | Safe Home Ultimate Drinking Water Test Kit | Mail-in | 200 parameters across metals, physical properties, inorganics, pesticides, herbicides, plasticizers, PAH, TTHMs, plus 78 VOCs and 47 tentatively identified VOCs | "EPA-certified laboratory", audited by state and federal agencies (maker's wording); Environmental Laboratories Inc., Madison, IN, since 1983 | 7 to 10 business days at lab | Bundled home vial only, not lab | Concentration reported by the lab | Not named in the published categories | | Watersafe Drinking Water Test | Strips plus one bacteria vial, read at home | 10 parameters: lead, bacteria, iron, copper, chlorine, nitrate, nitrite, pH, hardness plus one more | None (self-read) | 10 minutes for strips; 6 to 48 hours for the vial | Present or absent, vial rated to 1 bacteria/mL | Color band; maker rates the strip to 5 ppb | No | | Varify 17-in-1 Complete Drinking Water Test Kit | 100 strips plus two bacteria vials, read at home | 17 pads incl. pH, lead, fluoride, hardness, chlorine, iron, copper, alkalinity | None (self-read) | Minutes for strips; vials not stated on the maker's page | Present or absent, two vials | Color band; no detection level published | No | One pH note. Varify's own product page names pH among the 17 pads but publishes no measurement range or accuracy figure for it, so a well acidic enough for the [blue-green stains guide](/water/guides/blue-green-stains-low-ph-well-water/) has no published chart bottom to check against. A strip trades a number for a color, and three parameters do not survive the trade. | Parameter | What the strip or vial gives | What the certified lab gives | The limit it is judged against | |---|---|---|---| | Total coliform and E. coli | Present or absent from a growth vial; Watersafe rates it to 1 bacteria/mL, no count | A lab result for E. coli and total coliform, the test EPA and CDC name for annual well testing | EPA's total coliform rule counts positive samples, so presence is the finding and the lab confirms it | | Lead | A color band; Watersafe rates its strip to 5 ppb, Varify publishes no level | A concentration in ppb | EPA Lead and Copper Rule action level of 15 ppb, 10 ppb from November 1, 2027 | | PFAS | Nothing; no strip on this page reads PFAS | 25 PFAS compounds in SimpleLab's Extended tier only | Named by count on the kit, or not tested | Iron against EPA's secondary standard of 0.3 mg/L and manganese against 0.05 mg/L are also numbers on a lab report and color steps on a strip, which is why the [iron in well water guide](/water/guides/iron-in-well-water/) and the [manganese black stains guide](/water/guides/manganese-black-stains-well-water/) ask for a lab figure before a filter is sized. ## Tap Score Essential: buy it or skip it? Buy it if the water comes from a private well and there is no certified report from the last twelve months. SimpleLab's page lists 54 analytes, with E. coli and total coliform in the microbiology block, nitrate among the inorganics, and 29 metals and minerals: the four parameters EPA and CDC name for an annual test, plus the iron, manganese and hardness figures this site's guides ask for. SimpleLab publishes 5 business days at the lab and includes a cold shipping kit, because the bacteria sample has to arrive overnight. Its certification page states every lab in the network is accredited to ISO/IEC 17025, with NELAP or state ELAP certification. Price band: SimpleLab lists the Essential just above $200, the Advanced tier (114 analytes) just under $400 and the Extended tier (142 analytes, 25 PFAS, 2 radiologicals) above $1,000. Skip it if the question is PFAS: that is the Extended tier, at five times the cost. Skip it if the question is whether a filter still works; a strip answers that. Alternative: the Safe Home Ultimate, if the water is municipal and the worry is the chemical list rather than bacteria. ## Safe Home Ultimate: buy it or skip it? Buy it if the water is city water and the reason for testing is a long chemical list: Safe Home's page names 200 parameters, including a 78-compound VOC package, TTHMs, pesticides, herbicides and PAH, reported against federal MCLs within 7 to 10 business days of the sample reaching the lab. The lab is Environmental Laboratories Inc. of Madison, Indiana, in business since 1983, which Safe Home describes as an EPA-certified laboratory audited by state and federal agencies. That is the maker's wording: EPA does not accredit laboratories, so ask Safe Home which state certification the lab holds. Skip it for a well where bacteria is the question. The 200-parameter lab list does not include coliform; Safe Home covers bacteria with a free do-it-yourself vial in the kit, a home test, not a certified one. A positive vial sends you to a certified lab, then to the [shock chlorination guide](/water/guides/shock-chlorinate-a-well/). Skip it if PFAS is the worry: PFAS is not among the categories Safe Home publishes for this kit. Alternative: the Tap Score Essential, which puts coliform in the lab rather than in a vial. ## Watersafe Drinking Water Test: buy it or skip it? Buy it as the screen that decides whether to pay for a lab. Watersafe lists 10 parameters, including lead, bacteria, iron, copper, chlorine, nitrate, nitrite, pH and hardness, strip results in about 10 minutes, and a bacteria vial that turns in 6 hours at high counts and up to 24 to 48 hours at low counts or cool temperatures. Watersafe rates the lead strip to 5 ppb and the bacteria vial to 1 bacteria/mL, and states the kit is made in the USA by Silver Lake Research Corporation. Those are the maker's figures with no accreditation behind them. Skip it if a number is needed. The [lead](/water/guides/lead-in-tap-water-service-line/) result is a color band, not a concentration: it cannot tell 12 ppb from 9 ppb, the gap between today's 15 ppb action level and the 10 ppb EPA sets for November 1, 2027. Skip it if you plan to act on a positive vial alone: EPA and CDC name a certified laboratory for coliform. One caution on the model number. Watersafe's site sells this kit as the Drinking Water Test and does not print WS425B; older retailers list WS425B as a 9-in-1 kit with a pesticide strip. Check the box contents on the listing you open. Alternative: the Varify 17-in-1, for weekly tracking rather than a one-time screen. ## Varify 17-in-1: buy it or skip it? Buy it if you run a softener or a whole-house filter and check hardness, chlorine or pH every week. Varify's page lists 17 pads, including pH, lead, fluoride, hardness, chlorine, iron, copper and alkalinity, on 100 strips with two bacteria vials. One hundred strips is the spec that matters: at one a week it is two years of watching the hardness pad for a [softener](/water/reviews/best-water-softener-for-well-water/) that stopped regenerating, the check the [hard water white scale guide](/water/guides/hard-water-white-scale/) asks for. Skip it as a first test of a well. Varify publishes no detection level for the lead pad, no sensitivity for the bacteria vials, no measurement range for the pH pad, and no accreditation. Skip it if the result has to satisfy anyone but you. Alternative: the Watersafe kit, which at least publishes a 5 ppb figure for its lead strip. **Before you buy a test kit** Do not buy a strip kit to answer a well question, and do not buy a lab kit to answer a maintenance question. Private well, no certified report in the last year: mail a sample. The Tap Score Essential puts total coliform, nitrate, TDS and pH, the four EPA and CDC name for an annual test, in an accredited lab with 54 analytes for just over $200 at list. Softener or filter already installed, and the question is whether it still works: the Watersafe or Varify strips read hardness and chlorine in ten minutes. A positive vial, a lead band, or a stain the strip cannot explain is the lab's job, and the [well water test panel guide](/water/guides/well-water-test-panel/) lists which parameters to order. ## What goes wrong? The bacteria sample arrives warm or late. Tap Score ships a cold kit and asks for overnight delivery; a coliform sample that sits over a weekend is a result nobody can defend. The turnaround is counted from the wrong day. Both makers count business days from the day the lab receives the sample, 5 for Tap Score and 7 to 10 for Safe Home, excluding shipping, weekends and holidays. The strip is read as a number. A Watersafe lead strip rated to 5 ppb says lead is detectable, not whether the tap is at 9 ppb or 20 ppb, and the Lead and Copper Rule's action level is a concentration: 15 ppb today, 10 ppb from November 1, 2027. The kit does not cover the parameter. No strip reads [PFAS](/water/guides/pfas-in-tap-water-what-filter/), the Safe Home Ultimate does not put coliform in the lab, and the Tap Score Essential omits PFAS and radiologicals. Match the parameter to the kit before it ships. The wrong problem gets tested. A rotten egg smell is hydrogen sulfide, on none of the four base panels, and belongs on the [rotten egg smell guide](/water/guides/rotten-egg-smell-well-water/) instead. ## The picks - **SimpleLab Tap Score Essential Well Water Test**: Private well, first full panel or annual retest (Mail-in; 54 analytes incl. E. coli and total coliform; ISO/IEC 17025, NELAP or state accredited lab; 5 business days at lab) - **Safe Home Ultimate Drinking Water Test Kit**: City water, long chemical list, bacteria as a home vial (Mail-in; 200 parameters incl. 78-compound VOC package; 7 to 10 business days at lab; bacteria tested by a bundled home vial) - **Watersafe Drinking Water Test**: Ten-minute screen before or between lab tests (10 parameters; lead strip rated to 5 ppb; bacteria vial to 1 bacteria/mL in 6 to 48 hours; made in the USA) Amazon: https://www.amazon.com/dp/B00028PDO8/?tag=ownerspec-20 - **Varify 17-in-1 Complete Drinking Water Test Kit**: Tracking hardness, pH and chlorine weekly on a softener or filter (100 strips, 17 pads incl. hardness, pH, chlorine, iron, copper, fluoride; 2 bacteria vials; no accreditation, no published detection range) Amazon: https://www.amazon.com/dp/B0837Z5PBJ/?tag=ownerspec-20 ## Frequently asked questions ### Can a test strip detect coliform bacteria in well water? Not a strip, and not as a count. The Watersafe and Varify kits ship a separate vial that changes color when bacteria grow in it; Watersafe rates its vial at 1 bacteria per mL with a result in 6 to 48 hours. The vial answers present or absent. EPA and CDC both name a certified laboratory for total coliform, so a positive vial is the reason to mail a sample. ### Do the EPA drinking water limits apply to a private well? No. EPA's National Primary Drinking Water Regulations bind public water systems. EPA's private-well FAQ states that it does not regulate private wells and that the owner is responsible for testing. The MCLs and secondary standards are still the reference every lab report is judged against, and EPA and CDC recommend annual testing for total coliform, nitrate, total dissolved solids and pH. ### How accurate is a home lead test strip against the EPA action level? The strip reports a color band, not a concentration. Watersafe states its lead strip detects at 5 ppb, below the EPA action level of 15 ppb under the Lead and Copper Rule. Varify publishes no detection level for its lead pad. Only a certified lab reports a number in ppb, and the action level drops to 10 ppb on November 1, 2027, which narrows what a strip can resolve. ### How long does a mail-in water test take? Count from the day the lab receives the sample, not the day the kit ships. SimpleLab publishes 5 business days at the lab for the Tap Score Essential, and Safe Home publishes 7 to 10 business days for the Ultimate kit, both excluding shipping, weekends and holidays. Bacteria samples need overnight shipping, which is why Tap Score includes a cold shipping kit. ### Which test kit reads PFAS? None of the four on this page in their base tier, and no strip reads PFAS. SimpleLab's Extended Well Water Test, the top tier above the Essential, lists 25 PFAS compounds among its 142 analytes at a list price above $1,000. Safe Home does not name PFAS among the categories it publishes for the Ultimate kit. A PFAS result comes from a lab kit that names PFAS by count. ## Sources - [EPA, Secondary Drinking Water Standards: Guidance for Nuisance Chemicals](https://www.epa.gov/dwstandardsregulations/secondary-drinking-water-standards-guidance-nuisance-chemicals) (government or regulatory source) - [EPA, National Primary Drinking Water Regulations](https://www.epa.gov/ground-water-and-drinking-water/national-primary-drinking-water-regulations) (government or regulatory source) - [EPA, Lead and Copper Rule](https://www.epa.gov/dwreginfo/lead-and-copper-rule) (government or regulatory source) - [EPA, Frequently Asked Questions About Private Wells](https://www.epa.gov/privatewells/frequently-asked-questions-about-private-wells) (government or regulatory source) - [CDC, Well Testing (private wells)](https://www.cdc.gov/healthywater/drinking/private/wells/testing.html) (government or regulatory source) - [SimpleLab, Tap Score Essential Well Water Test product page](https://mytapscore.com/products/essential-well-water-test) (manufacturer or vendor document) - [SimpleLab, Why Tap Score Uses Certified Labs for Every Test](https://mytapscore.com/blogs/tips-for-taps/tap-score-lab-certifications) (manufacturer or vendor document) - [Safe Home Test Kits (Environmental Laboratories Inc.), homepage](https://safehometestkits.com/) (manufacturer or vendor document) - [Safe Home, Ultimate Drinking Water Test Kit product page](https://safehometestkits.com/product/safe-home-ultimate-drinking-water-test-kit-lab/) (manufacturer or vendor document) - [Watersafe (Silver Lake Research Corporation), Drinking Water Test, Lead Test and Bacteria Test product information](https://www.watersafetestkits.com/) (manufacturer or vendor document) - [Varify, Complete Drinking Water Test Kit product page](https://varify.com/products/complete-drinking-water-test-kit) (manufacturer or vendor document) --- Citation: OwnerSpec, "Best water test kit for well and city water: strips vs mail-in certified lab, by published spec", https://ownerspec.com/water/reviews/best-water-test-kit-well-and-city/, facts verified 12 September 2026. Canonical citation target: the URL above (the public HTML page), not this Markdown representation. Reuse: quoting with attribution and a link is permitted. See https://ownerspec.com/legal/terms/.